To Next Page

To Previous Page

4-22

X10SAE User’s Manual



Firmware Update Conguration

ME FW Image Re-Flash

Select Enable to re-ash the ME (Management Engine) Firmware. The options are

Disable and Enable.

AMT (Active Management Technology) Conguration

Intel AMT

Select Enabled to use Intel Active Management Technology (AMT) to enhance

system performance. The options are Enabled and Disabled.

Activate Remote Assistance Process

Select Enabled for Remote Assistance support, which can trigger CIRA boot, allow-

ing the system to boot via Client-Initiated Remote Access. The options are Enabled

and Disabled.

AMT CIRA Timeout

This feature allows the user to set the Client-Initiated Remote Access (CIRA)

Timeout setting. The default setting is 0.

BIOS Hotkey Pressed

Select Enabled to use the BIOS Hotkey feature. The options are Enabled and

Disabled.

Watch Dog Timer

Select Enabled to allow AMT (Advanced Management Technology) to reset or power

down the system if the operating system or BIOS hangs or crashes. The options

are Disabled, and Enabled.

OS Timer / BIOS Timer

These options appear if Watch Dog Timer (above) is enabled. This is a timed

delay in seconds, before a system power down or reset after a BIOS or operating

system failure is detected. Directly enter the value in seconds.



Super IO Conguration

Super IO Chip NCT6776F



Serial Port 1 Conguration /Serial Port 2 Conguration

Select Enabled to enable the onboard serial port. The options are Enabled

and Disabled.

Supero X10SAE User Manual

Questions and Answers: