4-24
X8DTH-6/X8DTH-6F/X8DTH-i/X8DTH-iF User's Manual
Change Supervisor Password
Select this feature and press <Enter> to access the submenu, and then type in a
new Supervisor Password.
User Access Level (Available when Supervisor Password is set as above)
The Options are Full Access, View Only, Limited, and No Access
Full Access
• : This feature grants full User read and write access to the Setup
Utility.
View Only: This feature allows the user to access the Setup Utility, but the user
•
is not allowed to change settings.
Limited: This feature allows only limited fi elds to be changed by the user.
•
No Access: This feature prevents User from accessing the Setup Utility.•
Change User Password
Select this feature and press <Enter> to access the submenu , and then type in a
new User Password.
Clear User Password (Available only when User Password has been set)
This item allows you to clear a user password after it has been entered.
Password Check
This item allows you to check a password after it has been entered. The options
are Setup and Always.
Boot Sector Virus Protection
When Enabled, the AMI BIOS displays a warning when any program (or virus) is-
sues a Disk Format command or attempts to write to the boot sector of the hard
disk drive. The options are Enabled and Disabled.
4-5 Boot Confi guration
Use this feature to confi gure boot settings.
To Next Page
Loading...
