Supero X9DR3-F User Manual

4-16
X9DR3-F/X9DRi-F Motherboard User’s Manual
Port 0~Port 5 Hot Plug
Select Enabled to enable hot-plug support for a port specied by the user
so that the user is allowed to change a hardware component or a device
without shutting down the system. The options are Enabled and Disabled.
Staggered Spin-up
Select Enabled to enable Staggered Spin-up support to prevent excessive
power consumption caused by multiple HDDs spinning-up simultaneously.
The options are Enabled and Disabled.
RAID Mode
The following items are displayed when RAID Mode is selected:
PCH RAID CodeBase
Set this item to Intel or LSI to specify the codebase to be used for RAID
support. The options are Intel and LSI.
Port 0~5 Hot Plug
Select Enabled to enable hot-plug support for a port specied by the user.
The options are Enabled and Disabled.

SCU(StorageControlUnit)Conguration
If a SCU port is detected in the system, the following items will be displayed.
SCU Devices
Select Enabled to enable support for PCH SCU (System Conguration Utility) de-
vices. The options are Disabled and Enabled.
OnChip SCU Oprom
Select Enabled to support the onboard SAS Option ROM to boot up the system via
a storage device if a SAS device is installed. The options are Disabled and Enabled.
SCU Port 0~7
The SCU devices detected by the BIOS will be displayed.

ThermalConguration
Thermal Management
Select Enabled to initialize the PCH Thermal subsystem device. The options are
Enabled and Disabled.

Supero X9DR3-F Specifications

General

Brand	Supero
Model	X9DR3-F
Category	Motherboard
Language	English