Warning! Serious injury may occur, before adjusting the mowing height,
please unplug the fuse and the key to general power supply, DO NOT try to adjust
the height when the machine is in operation. The blade is very sharp, please DO
wear the protect glove before replacing it.
2.4 Insert electric power supply fuse
Insert the fuse into the fuse box fixed on the back-end of the machine, any
direction will be OK. (As shown in Figure 2.4)
Figure 2.4
2.5 Clean the lawn
2.5.1 Measure the height of grass, the most appropriate native grass height for the
Intelligent Mower is less than 10 cm, if the grass grows too long and the mower can
not work properly, the drive wheel can easily be jammed or the blade connector may
get stuck by long grass, the Intelligent Mower will automatically stop. So please
clean the lawn before using the Intelligent Mower.
2.5.2 Check whether the lawn is flat, if there are holes on the ground; please fill
them before using the mower, to avoid the wheels felling in and the mower can not
move.
2.5.3 Clean sundries in the lawn, such as branches, little stones, and iron wires.
Keep your pets away.
2.5.4 During working, there may be small pieces swinging out and hurting people.
Please keep lookers and children away from the working area of the Intelligent
Mower.
18
!
To Next Page
Loading...
Need help?
General