Chapter Two Preparation before work of theIntelligentMower
2.1 Outside Check of the machine
Figure 2.1
Check the exterior integrity of the Intelliget mower, to see whether there is
damage or defect on the external components, whether the collision-prevention
sensor bar is agile and running smoothly, and whether the recharging bar is fasten
and well installed.
2.2 Read the signs
Please read the various warning signs and nameplate content on the Intelligent
mower carefully. (As shown in Figure 2.2)
Figure2.2
2.3 Adjust the height of blade
Please adjust the position of blade according to the ideal height of your lawn. The
Intelligent Mower adjusts mowing height through the blade connector, the
connector has two levels of standard height settings, and the height of grass after
mowing is 4-5 cm and 5-6 cm respectively. (See Figure 2.3)
Figure 2.3
17
Cutting height4- 5cm
Cutting height5- 6cm
To Next Page
Loading...
Need help?
General