●Charge: during working, press the button , the machine will automatically return
to charge station. And if you want she to go back work, you have to pull the power
key out, and then move it out of charge station to the lawn and restart it manually.
●Blade: Mowing switch, if the blade didn't work, press the button to start the blade,
during mowing, press it to stop its work.
3.3.1 Supplementary mowing
During the automatically mowing, it can not be avoided to leave some blank or
unsatisfied parts, for which you can press the button on the remote controller to
instruct the mower for supplementary mowing.
3.3.2 Make simple patterns or words on the lawn
If you are interested, you can order the mower to make some simple patterns or
words on the lawn, like “Welcome” or “LOVE”. Leverage the height and number of
blades, send instructions via the remote controller to the mower; you can get various
beautiful patterns and clear banner words.
Note: the lawn may be broken by the Intelligent Mower. The lawn should be flat
and no barriers or bushes, its length andwidth should be more than 3 meters and 2
meters respectively. If you are not capable to operate the remote controller, please
do not make patterns or words.
Warning! Serious injury or death may occur! When you are adjusting
the height and number of blades, unplug the key to the general power and keep the
remote controller well, in case the mower is started unconsciously and cause danger.
21
!
To Next Page
Loading...
Need help?
General