Administrators can enroll or delete users and change settings of the device.
1:1 Mode
z In 1:1 mode, a user should enter his/her user ID first. After then, the user is requested to place a
finger or enter a PIN. In this mode, user’s scanned fingerprint is matched against only one
fingerprint specified by the user ID.
1:N Mode
z In 1:N mode, a user places his/her finger without entering any ID. Then the device compares the
user’s scanned fingerprint with the whole enrolled fingerprints in its internal database.
Fingerprint Enrollment
z A process of extracting features of a fingerprint image obtained from a fingerprint sensor and
saving them into the internal memory of a device. The fingerprint data is called a fingerprint
template.
7
ⒸCopyright 2008 Suprema Inc.
Before Start