SureCall Force-5 - Force-5 Booster Hardware; Key Hardware Components

INTRODUCTION
SureCall Force-5 Cellphone-Mate, Inc. Page 5
All rights reserved.
Force-5 Booster Hardware
The following figure shows the key hardware components on the SureCall Force-5
cellular signal booster. Refer to this figure as you install your SureCall Force-5
components.
Five Warning LEDs
Outside Antenna Connector
(not shown)
Inside Antenna
Connector
Four Banks of DIP Switches
(left to
right):
•
LTE-707 (Verizon, 64dB-34dB)
•
LTE-781 (AT&T, 64dB-34dB)
•
Celllular-800 (65dB-35dB)
•
PCS-1900 (72-42 dB)
•
AWS-2100 (64-34dB)
Power LED
ON/OFF Switch