SurePrint SP91 - DIP Switch 2

SP91 User Manual
Baud Rate Selection
Transmission Speed （ Baud rate
BPS ）
Switch NO.
7 8
115200 OFF ON
38400 OFF OFF
19200 ON OFF
9600 ON ON
NOTE ： BPS – bits per second bit/second
3.3.2
3.3.2
3.3.2
3.3.2 DIP
DIP
DIP
DIP Switch
Switch
Switch
Switch 2
2
2
2
DIP Switch 2
Switch
Switch
Switch
Switch
NO.
NO.
NO.
NO.
Function
Function
Function
Function ON
ON
ON
ON OFF
OFF
OFF
OFF Default
Default
Default
Default
1 Select print valid width
Line printing 48
characters
Line printing 42
characters
OFF
2 Select print gray leve Deepen Lighten OFF
3 Select print paper width Paper width 58mm Paper width 80mm OFF
4 Kitchen mode
Buzzer doesn ’ t
awake after paper
cut
Buzzer awake after
paper cut
OFF
5 ---- ---- ---- OFF
6 ---- ---- ---- OFF
7 Alarm
Warn when closing
the buzzer
Warn when opening
the buzzer
OFF
8 ---- ---- --- OFF
3.4
3.4
3.4
3.4 LED/Alarm
LED/Alarm
LED/Alarm
LED/Alarm
1 ） Power LED ： Green
On ： Power is stable.
Off ： Power is not stable.
Standby State Indication ：
State
State
State
State Paper
Paper
Paper
Paper Out
Out
Out
Out LED
LED
LED
LED Flashing
Flashing
Flashing
Flashing Pattern
Pattern
Pattern
Pattern Recovery
Recovery
Recovery
Recovery Conditions
Conditions
Conditions
Conditions
Macro execution ready
state.
Pressing the FEED button
executes the macro.
NOTE ： A macro can be executed r times(r specifices the number of times to execute the macro) within
the specified definition range. The macro can be executed continuously or can be executed by
pressing the button. If the macro is executed by pressing the FEED button, the PAPER OUT