SP91 User Manual
The sensor which detect whether paper is present or not. When the sensor detects a paper-end,
the printer stops printing.
2 ） Roll paper near-end sensor
The sensor which detect a near-end of a paper roll.
When the paper roll diameter becomes sufficiently small, the detects a near-end of the paper roll
and the PAPER OUT LED lights. If the sensor is enabled by ESC c 4, the printer stops printing.
NOTES ： · Install the new roll paper and close the cover, the printer start to printer again.
· Paper near-end sensor ready by user.
3.11
3.11
3.11
3.11 Buffer-Full
Buffer-Full
Buffer-Full
Buffer-Full Printing
Printing
Printing
Printing
After the printer deal with one line dates in the buffer area, When the printer receive the continued date,
the printer will automatically print the processed date and feed paper one line (under the standard mode).
To Next Page
Loading...