SP91 User Manual
[Pa rticularize] · NV bit image defined bit image in NVM. Define by FS q, print by FS P.
· When the appointed NV bit image absent, this command is invalid.
· In stable mode, this command effects only when there are no data in buffer area.
· In page mode, this command is invalid.
· This command do not effected by print mode ( bold print , overlap print , underline
,
character size , anti-white print or character 90 rotation etc. ), except reversal print
mode.
·
If
set the NV bit image print area width which is less than a vertical line by GS L
and GS W, Executes the following operation only for problem line. In NV bit image
mode, a vertical line means the dot of normal mode ( m = 0, 48) and double height
mode ( m = 2, 50) , two dots of double width mode ( m = 1, 49) and quadruple mode
( m = 3, 51).
① In NV bit image mode, the print area width extendes to right to a vertical line. In this
case, print can not over the print area.
②
If
the print area width can not extend to a vertical line, the left blank decreases to
contain a vertical line.
·
If
the download bit image overs one line, do not print the over data.
· In normal and double width mode, this command feed paper n dots, n is the height of
NV bit image, In double height and qu adruple mode, this command feed paper 2n
dots, n is NV bit image height, do not related with the line spacing which set by ESC 2
and ESC 3.
· After printing bit image, this command set the print position at the original of one line,
and deal with the continued data as normal data.
[Reference] ESC
ESC
ESC
ESC *
*
*
* , FS
FS
FS
FS q
q
q
q , GS
GS
GS
GS /
/
/
/ , GS
GS
GS
GS v
v
v
v 0
0
0
0
ESC
ESC
ESC
ESC P
P
P
P m
m
m
m n1
n1
n1
n1 n2
n2
n2
n2
[ Name ] Set cash drawer command
[ Format ] ASCII ESC P m n1 n2
Decimal 27 112 m n1 n2
Hex 1b 70 m n1 n2
[ Range ] In cash drawer connector, output n1 n2 , asked n2 ≥ n1
m=0,48 output on cash drawer pin2.
m=1,49 output on cash drawer pin5.
[ Description ] Notes :
Open time is t
1
× 2ms
Turn-off time is t
2
× 2ms
If
t
2
< t
1
,
printer deal with t
2
=t
1
× 2ms
If
t
2
<50 , interior printer set t
2
to 50
FS
FS
FS
FS q
q
q
q n
n
n
n [xL
[xL
[xL
[xL xH
xH
xH
xH yL
yL
yL
yL yH
yH
yH
yH d1...dk]1...[xL
d1...dk]1...[xL
d1...dk]1...[xL
d1...dk]1...[xL xH
xH
xH
xH yL
yL
yL
yL yH
yH
yH
yH d1...dk]n
d1...dk]n
d1...dk]n
d1...dk]n
[Name] Define NV bit image
[Format] ASCII FS q n [xL xH yL yH d1...dk]1...[xL xH yL yH d1...dk]n