SureShade ATF-SG - Installing and Securing the Actuators

INSTALLATION
21
© 2018 Rodan Enterprises LLC t/a SureShade®
ATF Installation Guide
F. If your hardtop is curved, the mounting holes are di΍ erent than shade centerline. To determine
mounting hole location for topside surface mount with curvature, see Figure 9A. The mounting holes
will ultimately be drilled narrower than shade centerline. Mark location of mounting holes with a
grease pencil.
Correct Placement of Mounting Brackets
Mounting Hole
Drill Line
Shade Centerline Width
Mounting Hole
Drill Line
Optional
Mounting Spacer
Adjust placement of brackets
and mark holes here.
Figure 9A
Incorrect Placement of Mounting Brackets
Shade Centerline Width
DO NOT mark holes here.
Actuators will be too far apart.
Figure 9B
Figure 9 – Curved Surface Mount