4. Another tap will stop the Ai Navigator GPS
+
and the speed setting
will revert to 4.
5. The desired speed can be altered up or down while the Ai
Navigator GPS
+
is moving.
6. To activate the park brake stop the Ai Navigator GPS
+
by pressing
the speed control button. Turn the speed control button anti
clockwise until you hear a click and the speed will be marked as a
‘P’ to indicate brake has activated.
7. To cancel the park brake start the Ai Navigator GPS
+
by pressing
the speed control button.
6.2 TURN THE Ai NAVIGATOR GPS
+
ON/OFF
1. Disconnect the battery by sliding the battery connection switch
until the red indicator is displayed. Please note this disconnection will
also occur automatically when you fold the Ai Navigator GPS
+
.
Please note: When the ON/OFF Switch is used during operation, it
will erase any in-game information if you are currently mid-round.
Alternatively use the SLEEP mode which maintains all current game
information (see point 2).
2. To turn the Ai Navigator GPS
+
Top Box Display o: Hold down the
Start/Stop Speed Control Button for five seconds and the display will
bring up the sleep mode option. Select ‘Enable Sleep Mode’.
3. To reactivate the Top Box Display, whilst the battery is connected,
touch the screen to wake the Ai Navigator GPS
+
up.
Please note that the battery will still be connected to the Ai
Navigator GPS
+
and will continue to drain whilst connected.
4. To fully shut down the Ai Navigator GPS
+
and prevent the battery
from discharging, disconnect the battery as per point 6.3.
The battery can be le on or removed from the Ai Navigator GPS
+
.
6.3 BATTERY LEVEL INDICATOR
Battery indication is located on the bottom right-hand corner of the
display. It is displayed as a percentage. If you tap the battery icon it
will display further details including the remote battery level.
You should always check the battery status before you play golf to
ensure there is sucient charge.
MGI Ai Navigator GPS
+
User Manual 1.0 15
To Next Page
Loading...
Need help?
General
