i. Drive position – Lock the wheel onto the groove closest to the
battery base. To do this, press the black release button on the wheel
hub, push the wheel onto the axle as far as possible and pull back
until the wheel clicks into place. To test for drive position, try rolling the
wheel backward.
If you feel resistance then the wheel is now in drive position and
ready to use. Repeat for the other wheel.
ii. Free wheel – Lock the wheel onto the groove closest to the end
of the axle. To do this, press the black release button on the wheel
hub, push the wheel onto the axle and release the button onto the
groove.
To test for free wheel position try rolling the wheel backward. The
wheel should spin freely with no resistance. Repeat for the other
wheel. The two front wheels need to be attached to your MGI Ai
Navigator GPS
+
.
3.4 FIFTH FOLDABLE REAR WHEEL
The MGI Ai Navigator GPS
+
comes standard with a fih foldable rear
wheel. The wheel MUST always be unfolded into position when the Ai
Navigator GPS
+
is in use. This will reduce damage to the Ai Navigator
GPS
+
and provide the ultimate stability across all terrains.
This fih wheel should be cleaned regularly with a cloth to ensure it
can be folded and retracted as required for storage.
MGI Ai NAVIGATOR GPS
+
User Manual 1.0 8