3.0 ASSEMBLING YOUR Ai NAVIGATOR GPS
+
3.1 ATTACHING THE REAR WHEELS
First, lubricate both axles using the axle lubricant cloth provided
in the MGI Pouch. Lubrication of the axles should be performed
regularly to keep your cart in optimal condition.
Press the black release button on the wheel hub. Place the wheel
onto the axle. You will need to match up the inner female groove on
the axle and the male of the wheel. See Section 3.3 for Rear Wheels
Position.
When placed in position simply release the button. You will hear a
“click” when the wheel is properly secured.
To check that the wheel is properly in position, pull on the wheel. If it
is properly in position it will not slide o. Repeat for the other wheel.
MGI Ai NAVIGATOR GPS
+
User Manual 1.0 6