Need help?Do you have a question about the SUSS CIC1200 and is the answer not in the manual?
Describes the intended use of the CIC1200 as a power supply/regulator for high pressure UV lamps.
Outlines the necessary experience and training for safe operation and maintenance of the CIC.
Explains the meaning of safety terms like Danger, Warning, Caution, and Note.
Details general safety measures related to electrical hazards present in the unit.
Explains the function of emergency off (EMO) and safety interlocks in the system.
Provides additional safety information related to hazards originating from the host machine.
Details precautions for eye and skin protection from UV radiation and intense light.
Describes the layout, controls, and indicators on the front panel of the CIC1200.
Details the connectors and components located on the rear panel of the CIC1200.
Explains the stand-by mode of the CIC1200 and its monitoring functions.
Guides the user on how to select and verify the correct exposure lamp type.
Describes the three operating modes: CP, CH1, and CH2 for the CIC1200.
Outlines the standard procedures for igniting and operating the exposure lamp.
Covers procedures for calibrating the power supply using built-in or external UV meters.
Explains how to set and operate the CIC in Constant Intensity Mode.
Provides detailed steps for calibrating the built-in UV intensity meter.
Covers additional functions like full reset of calibration data.
Explains the procedure for safely switching off the exposure lamp and the unit.
Details regular safety checks and activities required for the CIC units.
Describes critical error messages, their causes, and manual reset procedures.
Covers installation procedures and information on obtaining technical assistance.
General| Brand | SUSS |
|---|---|
| Model | CIC1200 |
| Category | Controller |
| Language | English |
To Next Page