9
2. INSTALLATION
2.1 Unpacking
Make certain that you have received all of the following items in the P-97 shipping box:
• P-97 micropipette puller
*
• Power cord
• Sample box containing the following types of glass:
BF100-50-10 (Microinjection)
BF150-110-10 (Thin-Walled Patch (slice or whole tissue))
BF150-86-10 (Thick-Walled Patch (dissocated or cultured cells))
• One spare heating filament (FB255B)
• Warranty registration
• Sutter Instrument Product Catalog
• Pipette Cookbook
• Glass Stop
• BX-10 Pipette Storage Box
• Parameter Guide “cheat sheet” card
The Model P-97 micropipette puller is shipped to you in a custom box with foam inserts..
Please save shipping materials for future use. Should it ever be necessary to ship the puller
to another location, the same packaging should be used to prevent damage to the instrument.
Additional packing material may be purchased from Sutter Instrument Company.
IMPORTANT: Improper packaging is a form of abuse and, as such, can be responsible for
voiding the warranty where shipping damage is sustained because of such packing.
2.2 Setting Up
2.2.1 Line Power (Mains)
The power cord provided with the P-97 connects to the Power Entry Module located on the
back of the unit (see diagram below). This Module also includes the Line Fuse.
*
Unless specified otherwise, the P-97 is shipped equipped with, and configured for, a 2.5mm box heating filament.
P-97 FLAMING/BROWN MICROPIPETTE PULLER OPERATION MANUAL – REV. 2.43 - DOM (20161118)
To Next Page
Loading...
