Suzuki GSX-R1000 User Manual

Engine General Information and Diagnosis: 1A-45
P0120-H (Use of SDS)
Step Action Yes No
1 1) Turn the ignition switch OFF.
2) Lift and support the fuel tank. Refer to “Fuel Tank
Removal and Installation” in Section 1G (Page 1G-9).
3) Check the TP sensor couplers (1) and (2) for loose or
poor contacts.
If OK, then check the TP sensor lead wire continuity.
4) Disconnect the TP sensor couplers (1) and (2).
5) Check the continuity between the P/B wire and R wire.
If the sound is not heard from the tester, the circuit
condition is OK.
Special tool
(A): 09900–25008 (Multi circuit tester set)
Tester knob indication
Continuity ( )
6) Disconnect the ECM couplers. Refer to “ECM Removal
and Installation” in Section 1C (Page 1C-1).
Go to Step 3. P/B wire shorted to
VCC, or B/Br wire open.
1
2
I947H1110022-02
(A)
I947H1110118-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk

Suzuki GSX-R1000 Specifications

General

Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Fuel Tank Capacity	16.0 L (4.2 US gal)
Overall Length	2, 075 mm (81.7 in)
Wheelbase	1, 420 mm (55.9 in)
Ground Clearance	130 mm (5.1 in)
Seat Height	825 mm (32.5 in)
Starter	Electric
Final Drive	Chain
Front Brakes Brand	Brembo
Displacement	999.8cc
Bore x Stroke	55.1mm
Fuel System	Fuel injection
Transmission	6-speed constant mesh
Front Tire	120/70ZR17M/C (58W)
Engine Type	4-stroke, liquid-cooled, DOHC, 4-cylinder