Suzuki GSX-R1000 User Manual

Engine Mechanical: 1D-53
5) Remove the crankshaft journal bolts (M9).
6) Make sure that all of the bolts are removed. Then,
tap the sides of the lower crankcase using a plastic
hammer to separate the upper and lower crankcase
halves and then lift the lower crankcase off the upper
crankcase.
7) Remove the dowel pins and O-rings (3).
Balancer Shaft
Remove the balancer shaft assembly (1) and plug (2).
Transmission
Remove the transmission component. Refer to
“Transmission Removal” in Section 5B (Page 5B-3).
Crankshaft
1) Loosen the conrod cap bolts using a 10 mm, 12-
point socket wrench.
2) Remove the conrod caps by tapping the bolts lightly
with a plastic hammer.
I947H1140130-01
3
I947H1140131-04
1
2
I947H1140132-01
I947H1140133-01
I947H1140134-01
I947H1140135-01
I947H1140136-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk

Suzuki GSX-R1000 Specifications

General

Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Fuel Tank Capacity	16.0 L (4.2 US gal)
Overall Length	2, 075 mm (81.7 in)
Wheelbase	1, 420 mm (55.9 in)
Ground Clearance	130 mm (5.1 in)
Seat Height	825 mm (32.5 in)
Starter	Electric
Final Drive	Chain
Front Brakes Brand	Brembo
Displacement	999.8cc
Bore x Stroke	55.1mm
Fuel System	Fuel injection
Transmission	6-speed constant mesh
Front Tire	120/70ZR17M/C (58W)
Engine Type	4-stroke, liquid-cooled, DOHC, 4-cylinder