Suzuki GSX-R1000 - Bearing and Oil Seal

5B-4 Manual Transmission:
4) Using suitable size bolts (3), remove the driveshaft
left bearing case (4).
5) Remove the dowel pin.
6) Remove the driveshaft right bearing case bolts.
7) Using suitable size bolts (5), remove the driveshaft
right bearing assembly (6).
8) Remove the driveshaft assembly (7).
Bearing and Oil Seal
NOTE
If there is no abnormal condition, the oil seal
and bearing removal is not necessary.
CAUTION
!
The removed oil seal and bearing must be
replaced with a new one.
1) Remove the gearshift cam bearing (1) with the
special tools.
CAUTION
!
Be careful not to lean the bearing remover.
Special tool
(A): 09923–74511 (Bearing remover)
(B): 09930–30104 (Rotor remover sliding
shaft)
2) Remove the gearshift shaft oil seal (2). (LH only)
3
4
I947H1520028-01
5
6
I947H1520029-01
7
I947H1520030-01
(A)
(B)
1
I947H1520031-02
2
I947H1520032-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk