Charging System: 1J-7
Regulator / Rectifier Construction
B947H11A06005
Regulator / Rectifier Removal and Installation
B947H11A06006
Removal
1) Turn the ignition switch OFF.
2) Remove the right side cowling. Refer to “Exterior
Parts Removal and Installation” in Section 9D
(Page 9D-6).
3) Lift and support the fuel tank. Refer to “Fuel Tank
Removal and Installation” in Section 1G (Page 1G-
9).
4) Remove the EVAP system purge control solenoid
valve bracket bolt. (E-33 only)
2
“A”
FWD
FWD
3
4
(a)
(a)
1
(a)
5
1
I947H11A0020-03
1. Regulator/rectifier 4. Spacer : 10 N⋅m (1.0 kgf-m, 7.0 lbf-ft)
2. Regulator/rectifier bracket 5. Wiring harness
3. Air intake pipe (RH) “A”: Connect the regulator/rectifier couplers under the wiring harness.
I947H11A0019-01
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
