Steering / Handlebar: 6B-12
Specifications
Tightening Torque Specifications
B947H16207001
NOTE
The specified tightening torque is described in the following.
“Handlebar Components” (Page 6B-1)
“Steering Components” (Page 6B-5)
“Steering Damper Construction” (Page 6B-6)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-9).
Fastening part
Tightening torque
Note
N⋅m kgf-m lbf-ft
Front fork upper clamp bolt 23 2.3 16.5 )(Page 6B-3)
Handlebar clamp bolt 23 2.3 16.5 )(Page 6B-3)
Steering stem head nut
90 9.0 65.0
)(Page 6B-3) /
)(Page 6B-9)
Steering stem nut 45 N⋅m (4.5 kgf-m, 32.5 lbf-ft) then turn
back 1/4 – 1/2
)(Page 6B-8)
Steering stem lock-nut 80 8.0 58.0 )(Page 6B-8)
Steering damper bolt 23 2.3 16.5 )(Page 6B-9)
Steering damper nut 23 2.3 16.5 )(Page 6B-9)
Manuals by Motomatrix / The Solution For Lost Motorcycle Coded Keys
email: info@motomatrix.co.uk / www.motomatrix.co.uk
To Next Page
Loading...
