CHASSIS 6-47
REMOVAL
• Support the motorcycle with a jack to be no load for the rear
shock absorber.
• Remove the rear cushion lever bolt and nut.
• Remove the rear shock absorber lower mounting bolt and nut.
• Take out the rear shock absorber to downward.
INSPECTION
Inspect the shock absorber body and bushing for damage and
oil leakage.
If any defects are found, replace the shock absorber with a new
one.
#
Do not attempt to disassemble the rear shock absorber
unit. It is unserviceable.
• Remove the rear shock absorber upper mounting bolt and
nut.
To Next Page
Loading...
Need help?
General
