100 VL1500K5 (’05-MODEL)
DISASSEMBLY
• Remove the fuel pump holder
1.
• Disconnect the fuel pump coupler
2.
• Remove the band
3, rubber cushion
4 and fuel pump
5.
FUEL MESH FILTER INSPECTION AND
CLEANING
If the fuel mesh filter is clogged with sediment or rust, fuel will
not flow smoothly and loss in engine power may result.
• Blow the fuel mesh filter with compressed air.
NOTE:
If the fuel mesh filter is clogged with many sediment or rust,
replace the fuel filter cartridge with a new one.
REASSEMBLY
• Reassembly the fuel pump in the reverse order of disassem-
bly, and pay attention to the following points:
• Apply thin coat of engine oil to the new bushing and install it to
the fuel joint pipe.
'
Use the new bushing to prevent fuel leakage.
SAMPLE
To Next Page
Loading...
