18 VL1500K5 (’05-MODEL)
ENGINE COMPONENTS INSPECTION AND SERVICING
CAMSHAFT
For details other than the following, refer to the VL1500 Service
Manual.
Each camshaft I.D. code has been changed which is stamped
on the camshaft end.
CAM WEAR
" Cam height
H
Service Limit (IN) : 35.02 mm ( 1.379 in)
(EX) : 36.58 mm (1.440 in)
# 09900-20202: Micrometer (25 – 50 mm)
Front cylinder Rear cylinder
I.D. code B C
Front cylinder Rear cylinder
I.D.
SAMPLE
To Next Page
Loading...
