104 VL1500K5 (’05-MODEL)
THROTTLE BODY REMOVAL
• Remove the air cleaner box. (!Page 103)
• Disconnect the throttle cables from their drum.
'
• Disconnect the STP sensor coupler
1 and STVA coupler
2.
• Place a rag under the fuel feed hose and disconnect the fuel
feed hose
3 from the delivery pipe.
• Disconnect the fuel injector couplers.
• Loosen the throttle body clamp screws at the intake pipe side.
After disconnecting the throttle cables, do not snap
the throttle valve from full open to full close. It may
cause damage to the throttle valve and throttle body.
SAMPLE
To Next Page
Loading...
