Suzuki VL1500K5 - SPECIFICATIONS; DIMENSIONS AND DRY MASS; ENGINE SPECIFICATIONS; DRIVE TRAIN SPECIFICATIONS

VL1500K5 (’05-MODEL) 5
SPECIFICATIONS
DIMENSIONS AND DRY MASS
Overall length ...................................................... 2 525 mm (99.4 in)
Overall width........................................................ * 995 mm (40.2 in) ............... E-24
Overall width........................................................ * 1 020 mm (40.2 in) ............... Others
Overall height ...................................................... * 1 125 mm (44.3 in)
Wheelbase .......................................................... 1 700 mm (66.9 in)
Ground clearance................................................ * 140 mm ( 5.5 in)
Seat height .......................................................... 700 mm (27.6 in)
Dry mass ............................................................. * 302 kg (665 lbs)
ENGINE
Type..................................................................... 4-stroke, Air-cooled, OHC
Number of cylinders ............................................ 2
Bore..................................................................... 96 mm (3.780 in)
Stroke .................................................................. 101 mm (3.976 in)
Displacement ...................................................... 1 462 cm
3
(89.2 cu. in)
Compression ratio ............................................... 8.5 : 1
Fuel system......................................................... * Fuel injection
Air cleaner ........................................................... Non-woven fabric element
Starter system..................................................... Electric
Lubrication system .............................................. Wet sump
Idle speed............................................................ 1 000 ± 100 r/min
DRIVE TRAIN
Clutch .................................................................. Wet multi-plate type
Transmission ....................................................... 5-speed constant mesh
Gearshift pattern ................................................. 1-down, 4-up
Primary reduction ratio ........................................ 1.490 (76/51)
Secondary reduction ratio ................................... 0.852 (29/34)
Gear ratios, Low .................................................. 3.000 (36/12)
2nd .................................................. 1.823 (31/17)
3rd ................................................... 1.333 (28/21)
4th ................................................... 1.041 (25/24)
Top................................................... 0.884 (23/26)
Final reduction ratio............................................. 2.666 (19/19 × 32/12)
Drive system ....................................................... Shaft drive
SAMPLE