VL1500K5 (’05-MODEL) 163
* INJECTOR + FUEL PUMP + FUEL PRESSURE REGURATOR
* FI-SENSORS
ITEM SPECIFICATION NOTE
Injector resistance Approx. 11.7 Ω at 20 °C (68 °F)
Fuel pump discharge amount 168 ml (5.7/5.9 US/lmp oz) and more/10 sec.
Fuel pressure regulator operat-
ing set pressure
Approx. 300 kPa (3.0 kgf/cm
2
, 43 psi)
ITEM SPECIFICATION NOTE
CKP sensor resistance 178 – 242 Ω
CKP sensor peak voltage 2.4 V and more (When cranking)
IAP sensor input voltage 4.5 – 5.5 V
IAP sensor output voltage Approx. 2.53 V at idle speed
TP sensor input voltage 4.5 – 5.5 V
TP sensor resistance Approx. 4.66 kΩ
Closed
Approx. 1.12 kΩ
Opened
Approx. 4.41 kΩ
TP sensor output voltage
Closed
Approx. 1.12 V
Opened
Approx. 4.41 V
EOT sensor input voltage 4.5 – 5.5 V
EOT sensor output voltage 0.1 – 4.6 V
EOT sensor resistance Approx. 61.3 kΩ at 20 °C (68 °F)
IAT sensor input voltage 4.5 – 5.5 V
IAT sensor output voltage 0.1 – 4.6 V
IAT sensor resistance Approx. 2.45 kΩ at 20 °C (68 °F)
TO sensor resistance 19.1 – 19.7 kΩ
TO sensor voltage Normal 0.4 – 1.4 V
Leaning 3.7 – 4.4 V
When
leaning 65 °
GP switch voltage 0.6 V and more (From 1st to top)
Injector voltage Battery voltage
STP sensor input voltage 4.5 – 5.5 V
STP sensor resistance Approx. 4.69 kΩ
Closed
Approx. 0.5 kΩ
Opened
Approx. 3.9 kΩ
STP sensor output voltage
Closed
Approx. 0.5 V
Opened
Approx. 3.9 V
STV actuator resistance Approx. 6.5 Ω
Heated oxygen sensor output
voltage
0.4 V and less at idle speed
For E-02, 19, 24
0.6 V and more at 5 000 r/min
Heated oxygen sensor resis-
tance
6.5 – 8.9 Ω at 23 °C (73.4 °F)
PAIR solenoid valve resistance 20 – 24 Ω at 20 – 30 °C (68 – 86 °F)
SAMPLE
To Next Page
Loading...
