VL1500K5 (’05-MODEL) 173
• Connect the 12 V battery to the PAIR control solenoid valve
terminals and check the air flow.
• If air does not flow out, the solenoid valve is in normal condi-
tion.
• Check the resistance between the terminals of the PAIR con-
trol solenoid valve.
" Resistance: 20 – 24 Ω at 20 – 30 °C (68 – 86 °F)
# 09900-25008: Multi-circuit tester set
) Tester knob indication: Resistance (Ω)
If the resistance is not within the standard range, replace the
PAIR control solenoid valve with a new one.
Installation is in the reverse order of removal.
• Connect the lead wire coupler of the PAIR control solenoid
valve and PAIR hoses securely.
PAIR system hose routing. (!Page 175)
Ω
SAMPLE
To Next Page
Loading...
