32
Language: The language that the DVR’s menus, alerts and other com-
munications will use. Multiple languages are available.
Resolution: Set the output resolution of the DVR according to the display
that is connected. Check the documentation included with your display
to see the maximum resolution supported.
Time Zone: Set this to the Time Zone where you happen to be. For exam-
ple, people in the Australian Eastern Time zone (Canberra, Sydney and
Melbourne) choose GMT+10:00, whilst the Eastern Standard Time zone
(USA and Canada) choose GMT-05:00 (GMT stands for Greenwich Mean
Time - it’s the baseline that keeps all the different time zones in sync).
Date Format: The format the date will be displayed.
System Date: You can manually set the date if it is incorrect.
System Time: You can manually set the time if it is incorrect.
Mouse Pointer Speed: Move the slider to increase or decrease the
mouse pointer speed.
Enable Wizard: When checked, the DVR will automatically run the Set-
up Wizard when it is switched on. The Setup Wizard itself contains the
option to disable it.
Enable ID Authentication: When enabled, the DVR will require a pass-
word to access the Menu.
• Don’t forget to click “Apply” to save settings.
• Click the “Back” button to go back to the Menu.
Configuration: General - General
The settings for Lan-
guage, Resolution,
Time Zone, System
Date & Time and Day-
light Saving (DST) are
configured during the
Setup Wizard.
To Next Page
Loading...
