43
In the View tab, you can change the display order of each camera con-
nected.
1. Select an available viewing window on the right-hand side.
2. Double-click one of the cameras available. That camera will be placed
in the viewing window that you selected.
3. Select the Live View mode that you would like to change.
4. Press the “Start live view of all channels” button to start the Live View
of all cameras connected to the DVR. Press the “Stop live view of all
channels” button to stop the Live View of all cameras connected to the
DVR. Please note, pressing the “Stop live view of all channels” button
means you will not see a real-time image in Live View mode.
5. When selecting different Live View modes, you can click the “Next”
and “Previous” buttons to change the viewing windows available. The
page numbers displayed will change depending on which Live View
mode you have selected.
• Don’t forget to click “Apply” to save settings.
• Click the “Back” button to go back to the Menu.
Configuration: Live View - View
2
3 4 5
1
To Next Page
Loading...
