53
Init: Click the hard drive’s checkbox to select then click this button to
format. A message will appear noting that all data will be erased. Make
sure you backup your hard drive if required before formatting. Click
“OK” to continue.
• Click the “Back” button to go back to the Menu.
HDD: General
The HDD General
function allows you to
initialize the hard drive
inside the DVR. Initial-
izing will format the
drive and erase any
data that is on there.
Please note, the hard drive has been pre-formatted during man-
ufacture. If adding a replacement drive, use the “Init” button to
format.
To Next Page
Loading...
