Swarm M138 - $PW - Power Status

$PW - Power Status
Set or query the rate for $PW unsolicited report messages for device power state. Also can
retrieve the most current $PW message.
$PW <@|?|<rate>>*xx
Parameter
Description
@
Repeat most recent $PW message
?
Query current $PW rate
rate
Disable or set rate of $PW messages
Returns one of:
Parameter
Description
$PW
<unused>,<unused>,<unused>,<unused>,<temp>
*xx
The most recent $PW message
$PW <rate>*xx
The current $PW rate
$PW OK*xx
Parameters updated
successfully
$PW ERR*xx
Command input error
Parameter
Description
unused
Will always show as 0.00000
temp
CPU Temperature in degrees C to one decimal point (float)
November 2021 Swarm M138 Modem Manual - Rev 1.00 60/77