Swisscom Aton CL317 - Manually registering the handset

16
First steps
Gigaset E500H / Aton CL317 / Schweiz PTT EN / A31008-M2256-F151-1-2X19 /
Version 4, 16.09.2005
Manually registering the handset
You must manually register the handset on both the handset (1) and
the base (2).
A handset can be registered on up to four bases.
After it has registered, the handset returns to idle status. If it does
not appear, repeat the procedure.
1) On the handset
§Menu§ ¤ Settings ¤ Registering ¤ Register Handset
If the handset is already registered to four bases:
s Select base, e.g., 3 and press
§OK§.
~ If required, enter the system PIN for the base and
press
§OK§.
The display shows Handset is registering.
2) On the base
¤ Within 60 seconds, press and hold the registration/paging key
on the base (approx. 3 seconds).
Please note
For instructions on deregistering the handsets, please consult
the base user guide.