Swisscom Aton CL317 - Transferring a call to another handset;internal consultation; Accepting a waiting call; Using the redial list; Dialling from the redial list

35
Using the directory, direct dialling keys and lists
Gigaset E500H / Aton CL317 / Schweiz PTT EN / A31008-M2256-F151-1-2X19 / telephony.fm /
Making internal calls
Internal calls are free calls between
handsets that are registered with
the same base.
Prerequisite: Before you can use this
function you must label one of the
direct dialling keys (; to >) with
the internal call function.
Setting up an internal call
Prerequisite: The relevant direct
dialling key has not already been
assigned a function.
Example: Set up key < for making
an internal call to a selected
number.
< ¤ q Label with Internal Call
¤
§OK§
Example: Set up key = for making
an internal call to all registered
handsets.
= ¤ q Label with Call All Int.
¤
§OK§
The internal call is set up for keys <
and =.
If you need to change the label of a
direct dialling key ¢ page 34.
Making an internal call
To make the internal call, press the
key that is labelled with the internal
call while the phone is in idle status.
Example: Press key <.
The list of handsets is opened. You
can scroll through the list. Your own
handset is indicated by <.
q Select Call All INT and
press
§OK§ or
q Select an individual hand-
set and press the talk key
c.
The selected handset or all of the
handsets are called.
Example: Press key =.
All handsets are called immediately.
Accepting an internal call
Your telephone rings and the inter-
nal number of the caller (e.g., INT 2)
or the assigned name appears in the
display.
Press the talk or handsfree key c/
d on the handset to accept the
call.
Ending a call
Press the end call key a on the
handset.
Please note
If no-one answers, the handset
switches to idle status after
3minutes.