Swisscom Aton CL317 - Making internal calls; Setting up an internal call; Making an internal call; Accepting an internal call

34
Using the directory, direct dialling keys and lists
Gigaset E500H / Aton CL317 / Schweiz PTT EN / A31008-M2256-F151-1-2X19 / telephony.fm /
Version 4, 16.09.2005
Direct dialling keys
; to >
You can save important phone num-
bers that you call often to the four
direct dialling keys. You can assign
an external phone number or the
internal call function (¢ page 35) to
each direct dialling key.
To dial these saved numbers, press
the corresponding direct dialling
key ; to >.
Assigning a function to direct
dialling keys
Prerequisite: The direct dialling key
in question has not already been
assigned a function.
¤ In idle status, press the direct dial-
ling key (; to >) on the handset
to which you wish to assign a
function.
Select the relevant function using
q:
Label with Ext. No.
Enter an external phone number
directly.
~ Enter the number and
press
§OK§.
~ Enter the name and
press
§OK§.
Label with Internal Call
(See "Setting up an internal call",
page 35)
Label with Call All Int.
(See "Setting up an internal call",
page 35)
Label with Dir. Number
Label the key with a number from
the directory.
The directory is opened. Select a
number and press
§OK§.
Changing the function of the
direct dialling keys
§Menu§ ¤ q Settings ¤ §OK§
¤ q Direct Dial Keys ¤ §OK§
¤ q Select direct dialling key
(I to IV)
The current labelling is displayed
after the key number, e.g.,
I: <no entry>
i.e., the ; key is not currently
labelled or
IV: Call INT
i.e., the > key is labelled with the
internal call function.
You can now change the labelling.
Select a function with
§Menu§ ¤ q.
Not all functions may be available,
depending on the current labelling.
Delete Entry
Delete current key labelling.
Edit Entry
Change phone number and/or
name.
Label with Dir. Number
Label the key with a number from
the directory.
Label with Internal Call
(see example using < key
"Making an internal call", page 35)
Label with Call All Int.
(see example using = key
"Making an internal call", page 35)
To save an external phone number
to a key that is already labelled with
the internal call function, you must
first delete the existing entry.