33
Using the directory, direct dialling keys and lists
Gigaset E500H / Aton CL317 / Schweiz PTT EN / A31008-M2256-F151-1-2X19 / telephony.fm /
Dialling with the directory
s ¤ q (Select entry) ¤ c
Managing directory entries
Select an entry.
Editing entries
§Menu§ ¤ q Edit Entry ¤ §OK§
¤ ~ (Change number if required)
¤
§OK§
¤ ~ (Change name if required)
¤
§OK§
Using other functions
The following functions can be
selected with
§Menu§ ¤ q:
Show Number
Show number.
Use Number
Edit or add to a stored number.
Then dial or select other functions
with
§Menu§.
Delete Entry
Delete selected entry.
Send Entry
Send a single entry to another
handset (¢ page 33).
Delete List
Delete all directory entries.
Send List
Send the complete list to another
handset (¢ page 33).
Sending the directory to
another handset
You can transfer directory entries
from other handsets to your new
handset – even entries from old
handsets.
Prerequisites:
u The sending and receiving hand-
sets must both be registered to
the same base.
u The other handset and the base
can send and receive directory
entries.
s ¤ q (Select entry) ¤
§Menu§
¤ q Send Entry / Send List ¤
§OK§
¤ q (select the internal number
of the receiving handset) ¤
§OK§
A successful transfer is confirmed by
a message and confirmation tone
on the receiving handset.
Adding a displayed number to
the directory
You can copy numbers displayed in
a list, e.g., the call list or redial list, to
the directory.
A number is displayed.
§Menu§ ¤ Copy to Directory ¤ §OK§
¤ Complete the entry (¢ page 32).
To Next Page
Loading...