Swisscom Aton CL317 - Page 44

43
Handset settings
Gigaset E500H / Aton CL317 / Schweiz PTT EN / A31008-M2256-F151-1-2X19 / T-NetBox_SAG-regis-
Setting the ringer melody
Set different ringer melodies for
external calls, internal calls and the
alarm clock.
For external calls you can also spec-
ify that your phone should not ring
at certain times or if a call is from an
unknown caller.
For internal calls and the alarm
clock
§§Menu§ ¤ q Settings ¤ §OK§
¤ q Audio/Visual Signals ¤ §OK§
¤ q Ringtones ¤ §OK§
¤ q Internal Calls / Alarm Clock
¤
§OK§ ¤ q (Select melody)
¤
§OK§ (³= selected)
For external calls:
§§Menu§ ¤ q Settings ¤ §OK§
¤ q Audio/Visual Signals ¤ §OK§
¤ q Ringtones ¤ §OK§
¤ q External Calls ¤ §OK§
q can be used for the following:
Melody ¤
§OK§
You can set the ringer melody as
described above.
Time Control ¤
§OK§
You can specify a time period
when you do not want the tele-
phone to signal external calls e.g.,
during the night.
Switch q Activation on or off
by pressing
§OK§ (³= activated).
q Settings ¤
§OK§
Starting Time: /Ending Time:
Enter each time as a 4-digit
number and press
§OK§.
Anon. Calls Silent ¤
§OK§
You can set your handset so that it
doesn't ring for calls where Call-
ing Line Identification has been
withheld (not answering
machine). The call will only be sig-
nalled on the display.
Switch the Anon. Calls Silent
function on or off by pressing
§OK§
(³= activated).
Activating/deactivating the
ringer
You can:
u Permanently deactivate the
ringer in idle status or when
receiving a call
u Deactivate the ringer for the cur-
rent call only
The ringer cannot be re-activated
while a call is in progress.
Deactivating the ringer
permanently
P Press and hold the star
key.
The
Ú
icon appears in the display.
Reactivating the ringer
P Press and hold the star
key.
Deactivating the ringer for the
current call
§Silence§ Press the display key.