EasyManua.ls Logo

Swisson XMT-500 - Battery Charging; Technical Information

Swisson XMT-500
16 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Further
information
Swisson AG SWISSON of AMERICA Corp.
Fabrikstrasse 21 2419 East Harbor Blvd.#3
CH-3250 Lyss Ventura, CA 93001
Switzerland U.S.A.
www.swisson.com
info@swisson.com
Technical information
Dimensions WxHxD 122.5 x 75.3 x 43mm
(4.82” x 2.96” x 1.73”)
Weight 445g (0.98 lbs)
Operating temperature -20°C to 50°C (-4°F to 122°F)
Charging temperature 0°C to 50°C (32°F to 122°F)
Rechargeable battery 3.6V, 3200mAh
Protocol standards Art-Net 1-4
sACN (ANSI E1.31), sACN draft version (v0.2)
ANSI E1.11 (DMX-512), ANSI E1.20 (RDM)
EIA-485 (electrical standard for signal ports)
Art-Net™ Designed by and copyright Artistic Licence Holdings Ltd
©2023 Swisson AG
Release: 0.0c
Battery charging
For charging, any common USB charger with at least 4.5W can be used
(the charging port has a USB-C connector). For minimal charging time,
we recommend using one of the following types (with a USB-C adapter
where necessary):
USB 3.2 Type-A (7.5W, 5V)
USB Type-C ( >=7.5W, 5V)
USB BC1.2 (7.5W, 5V)
Using USB 1.0 or 2.0 chargers with power less than 4.5W is possible but
not recommended. This will take a long time and the XMT-500 internal
protection system might stop the charging process after multiple hours of
charging.