14
QUICKSTART
5) Put the cellophane around the
machine.
Finished packing
6) Putting the box and final strapping.
2) Screw on the locking parts (see chapter 1.3.4.) 3) Place the machine in front of the pal-
let screw and couple the machine to the
pallet with 2 M8 lock nuts.
4) Close up the machine by replacing
the side panels :
6.3. Packing the machine
1) Prepare the original pallet. (ref : M104-000-090)
Remark : It is mandatory to pack the machine on a plastic film to
protect the machine from moisture.
To Next Page
Loading...
