b). Abnormal injector condition: The injection spray will be narrow, with poor nebulization
(As shown in Figure 22)
5). Abnormal phenomenon and treatment:
a). Electrical resistance value NG → Injector abnormal, replace with a new component.
b). Bad Injection system integrity- there are several possible causes:
Congested injector → replace with a new injector
Insufficient fuel pressure → Check the fuel pump system and reconfirm the fuel pressure
afterwards.
***When checking the fuel injector integrity, the fuel injected MUST be collected with proper
container to avoid possible danger.
10 Crank Position Sensor
1). Picture illustration:
To Next Page
Loading...
