Sym JOYMAX 250 - Installation of Engine

5. Removal & Installation of Engine
5-10
Installation of Engine
Install the engine according to the reversing order
of removal.
Caution
 Note both feet and hands safety for
squeezing as engine installation.
 Do not bent or squeeze each wires or hose.
 Route all cables and wires in accordance with
the routine layout.
Engine hanger nut:
Torque Value: 7.5~9.5kgf-m
Rear cushion bolt:
Torque Value: upper: 3.5~4.5kgf-m
Under: 2.4~3.0kgf-m
Rear wheel axle nut:
Torque Value: 11.0~13.0kgf-m
To this chapter contents