Sym JOYMAX 250 - Page 247

10
0135
O2 sensor heater
Blinking
Long 4 Short 5
Check O2 sensor heater and wiring.
11
1505
ISC motor
Blinking
Long 4 Short 9
Check ISC motor and wiring.
12
1410
Air Injection solenoid
Blinking
Long 5 Short 4
Check Air Injection solenoid and
wiring.
13
0335
Crank sensor
Blinking
Long 6 Short 6
Check Crank sensor and wiring.
14
1205
Manifold Air Pressure Wiring
Blinking
Long 6 Short 8
Check Manifold Air Pressure
Wiring.
15
0603
EEPROM
No Blinking
Long 0 Short 0
EEPROM Error.
Please recheck by Diagnostic tool. If EEPROM error confirmed, replace ECU.
WARINING!
The CHK LIGHT blinking error message is for reference only! Please use SYM
Diagnostic tool for problem confirmation.
It is very easy to MISREAD the error message by the blinking check lights, thus
causing wrong diagnostic and repair treatment.
PLEASE USE SYM OFFICIAL DIAGNOSTIC TOOL.