LS4278 Product Reference Guide11-6
Scanner Emulation Host
Scan the bar code below to enable the Scanner Emulation host.
Scanner Emulation Host Parameters
Beep Style
The Scanner Emulation host supports three beep styles.
• Beep On Successful Transmit: The scanner beeps when the attached decoder issues the decode signal to the scanner,
so the scanner and the attached decoder beep at the same time.
• Beep At Decode Time: The scanner beeps upon decode. This results in a double beep sequence from most decoders, since
the scanner beeps, and the decoder beeps (at a different frequency) when it successfully decodes the output.
• Do Not Beep: Only the attached decoder issues the decode beep.
Undecoded Scanner Emulation Host
*Beep On Successful Transmit
Beep At Decode Time
Do Not Beep
To Next Page
Loading...
