LS4278 Product Reference Guidexiv
• Throughout the programming bar code menus, asterisks (*) are used to denote default parameter settings.
Related Publications
The LS4278 Quick Reference Guide (p/n 72-69835-xx) provides general information to help the user get started with the scanner. It
includes basic operation instructions and start up bar codes.
The STB4208/4278 Cradle Quick Reference Guide (p/n 72-71010-xx) provides information to help the user set up and use the charge
only and host interface cradles. It includes set up and mounting instructions.
For the latest versions of the LS4278 Quick Reference Guide and the LS4278 Product Reference Guide go to:
http://www.symbol.com/manuals.
Service Information
If you have a problem with your equipment, contact the Symbol Support Center. Before calling, have the model number, serial number,
and several bar code symbols at hand.
Call the Support Center from a phone near the scanning equipment so that the service person can try to talk you through your problem.
If the equipment is found to be working properly and the problem is symbol readability, the Support Center will request samples of
your bar codes for analysis at our plant.
If your problem cannot be solved over the phone, you may need to return your equipment for servicing. If that is necessary, you will
be given specific directions.
Symbol Technologies is not responsible for any damages incurred during shipment if the approved shipping
container is not used. Shipping the units improperly can possibly void the warranty. If the original shipping
container was not kept, contact Symbol to have another sent to you.
Symbol Support Center
For service information, warranty information or technical assistance contact or call the Symbol Support Center listed below. For the
latest service information go to http://www.symbol.com.
United States
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, New York 11742-1300
1-800-653-5350
Canada
Symbol Technologies Canada, Inc.
5180 Orbitor Drive
Mississauga, Ontario L4W 5L9
905-629-7226
*Baud Rate 9600
Feature/Option
* Indicates Default
Note
To Next Page
Loading...
