LS4278 Product Reference Guide2-10
When the bar code is in view, the scanner emits a full scan line. After a decode, the scan line blinks.
5. Upon successful decode, the scanner beeps and the LED turns green. For more information about beeper and LED definitions,
see Table 2-1 and Table 2-2.
If no bar code is decoded after 15 minutes in the Intellistand, the scanner enters low power mode, or
Intellistand idle timeout. See Intellistand Idle Timeout on page 5-7 to set the Intellistand idle timeout interval.
To Next Page
Loading...
