User’s Manual
Synaccess Networks, Inc. www.synaccess-net.com (760) 930 – 0473 Page 32 of 46
Figure 22 – Reply Email Before a Control Command Is Executed
A control command is not executed if the system name does not match, user name does not
exists, or the name does not have the privilege to operate the designated serial console port or
power outlet port, or if there is a command syntax error. If this happens, a reply email is sent
to indicate the problem of the command, as shown in the Figure 23.
Figure 23 – Reply Email Indicating System Name Mismatch Error
Helpful Info:
To Next Page
Loading...