SYNAPTICON SOMANET Node Series Hardware Manual

1.6.4 Using the safety functions
Attention
Activating SBC independently of or with a delay to STO is not possible.
When STO is active SBC will also be activated, if a brake is connected it will be engaged.
To prevent damaging the brake, a Safe Stop Category 1 (SS1) is recommended.
1.6.4.1 Timing diagrams
1.6.4.1.1 Timing diagram for STO-function without connected brake
Hardware Manuals / SOMANET Node / SOMANET Node rev. E.1
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.10.2 | Built 2021-07-06 56/67

SYNAPTICON SOMANET Node Series Specifications

General

Brand	SYNAPTICON
Model	SOMANET Node Series
Category	Servo Drives
Language	English