Name: SYNAPTICON SOMANET Node Series
Brand: SYNAPTICON
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1.6.5.3.2 Wiring

Note

For a PLe, SIL 3 system please regard the requirements for fault exclusion between the STO-SBC 1

and STO-SBC 2 signals.

1.6.5.3.3 Configuration

Master PLC/IPC

Program the digital input to request quick stop via EtherCAT Controlword 0x6040

Delay time (in Safety relay)

Configure the time according to your application. The delay time should be longer than the

maximum deceleration time of the application. .

Ramp time (in SOMANET)

Configure the Quick stop deceleration (0x6085) according to your application.

Hardware Manuals / SOMANET Node / SOMANET Node rev. E.1

Other manuals for SYNAPTICON SOMANET Node Series

Questions and Answers:

Need help?

Do you have a question about the SYNAPTICON SOMANET Node Series and is the answer not in the manual?

General