Synesso MVP Hydra

57
PROGRAMMING
Line 1 of the error log screen shows how many errors the machine has recorded, up to the 35 most recent
errors, and which of these you are currently viewing. This example is showing “2/2”, indicang the second of
two errors is displayed.
Line 2 indicates the error code. If the error log is clear, this line will simply read “NO ERRORS” as shown be-
low.
Line 3 indicates the date and me that the last error has occurred. If no error has occurred, this line will be
blank.
Line 4 gives the opon to scroll through or clear the error log. To view older errors, press the 4th line buon
once, which will make [SCROLL] ash. Use the up and down buons to change the viewed error. Press the
4th line buon again and [CLEAR] will begin ashing instead of [SCROLL]. Press the 4th line buon again to
deselect both opons.
Please see the following page for instrucons on clearing the error log.
Menu Level 2: Error Log